资料描述
【英文标准名称】: Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
【原文标准名称】: 石油产品倾点测试方法(自动空气压力法)
【标准号】: ANSI/ASTM D6749-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】: 2002
【实施或试行日期】:
【发布单位】: 美国国家标准学会(US-ANSI)
【起草单位】: ANSI
【标准类型】: ()
【标准水平】: ()
【中文主题词】:
【英文主题词】: Air;Atmospheric pressure;Automatic;Materials testing;Petroleum products;Pour point;Testing
【摘要】: This test method covers the determination of pour point of petroleum products by an automatic apparatus that applies a slightly positive air pressure onto the specimen surface while the specimen is being cooled. This test method is designed to cover the range of temperatures from -57 to +51?C; however, the range of temperatures included in the (1998) interlaboratory test program only covered the temperature range from -51 to 11?C. Test results from this test method can be determined at either 1 or 3?C testing intervals. This test method is not intended for use with crude oils. Note 1The applicability of this test method on residual fuel samples has not been verified. For further information on the applicability, refer to 13.4. The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: E30
【国际标准分类号】: 75_080
【页数】:
【正文语种】: 英语
ANSI/ASTM D2321-2011 排污水和其它重力流动设备用热塑性塑料管的地下安装用实施规程
【英文标准名称】: Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
【原文标准名称】: 排污水和其它重力流动设备用热塑性塑料管的地下安装用实施规程
【标准号】: ANSI/ASTM D2321-2011
【标准状态】:
ANSI/ASTM E2148-2011 金属加工或金属切削液卫生与安全性相关文献的使用指南
【英文标准名称】: Guide For Using Documents Related To Metalworking Or Metal Removal Fluid Health And Safety
【原文标准名称】: 金属加工或金属切削液卫生与安全性相关文献的使用指南
【标准号】: ANSI/ASTM E2148-2011
【标准状态】: 现行
ANSI/ASTM E2523-2011 金属加工液和操作用术语
【英文标准名称】: TERMINOLOGY FOR METALWORKING FLUIDS AND OPERATIONS
【原文标准名称】: 金属加工液和操作用术语
【标准号】: ANSI/ASTM E2523-2011
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2011
ANSI/ASTM E2564-2011 用直接显微镜计数(DMC)法进行金属加工流体中分支杆菌计数的试验方法
【英文标准名称】: TEST METHOD FOR ENUMERATION OF MYCOBACTERIA IN METALWORKING FLUIDS BY DIRECT MICROSCOPIC COUNTING (DMC) METHOD
【原文标准名称】: 用直接显微镜计数(DMC)法进行金属加工流体中分支杆菌计数的试验方法
【标准号】: ANSI/ASTM E2564-2011
ANSI/ASTM D2513-2011 聚乙烯(PE)压力管,管道和配件用规格
【英文标准名称】: Specification for Polyethylene (PE) as Pressure Pipe, Tubing, and Fittings
【原文标准名称】: 聚乙烯(PE)压力管,管道和配件用规格
【标准号】: ANSI/ASTM D2513-2011
【标准状态】: 现行
【国别】: 美国
ANSI/ASTM D2729-2011 聚氯乙烯(PVC)污水管及管配件规格
【英文标准名称】: Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
【原文标准名称】: 聚氯乙烯(PVC)污水管及管配件规格
【标准号】: ANSI/ASTM D2729-2011
【标准状态】: 现行
【国别】: 美国
ANSI/ASTM D5685-2011 玻璃纤维规格.玻璃纤维加固的热硬性树脂加压管配件
【英文标准名称】: Specification for Fiberglass Glass-Fiber-Reinforced Thermosetting-Resin Pressure Pipe Fittings
【原文标准名称】: 玻璃纤维规格.玻璃纤维加固的热硬性树脂加压管配件
【标准号】: ANSI/ASTM D5685-2011
【标准状态】: 现行
ANSI/ASTM F2619-2011 高密度聚乙烯(PE)线管规格
【英文标准名称】: Specification for High-Density Polyethylene (PE) Line Pipe
【原文标准名称】: 高密度聚乙烯(PE)线管规格
【标准号】: ANSI/ASTM F2619-2011
【标准状态】: 现行
【国别】: 美国
【发布日期】:
ANSI/ASTM D3139-2011 柔性合成橡胶密封塑料承压管用连接件规格
【英文标准名称】: Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seal
【原文标准名称】: 柔性合成橡胶密封塑料承压管用连接件规格
【标准号】: ANSI/ASTM D3139-2011
【标准状态】: 现行
【国别】:
ANSI/ASTM E1355-2011 火焰模型预测能力评定指南
【英文标准名称】: GUIDE FOR EVALUATING THE PREDICTIVE CAPABILITY OF DETERMINISTIC FIRE MODELS
【原文标准名称】: 火焰模型预测能力评定指南
【标准号】: ANSI/ASTM E1355-2011
【标准状态】: 现行
【国别】: 美国
ANSI/ASTM D5580-2002 气相色谱测定汽油成品中苯、甲苯、乙苯、顺式、反式C9和重芳香族及全部芳香族的试验方法
【英文标准名称】: Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
【原文标准名称】: 气相色谱测定汽油成品中苯、甲苯、乙苯、顺式、反式C9和重芳香族及全部
ANSI/ASTM D5985-2002 石油产品倾点测试方法(旋转法)
【英文标准名称】: Test Method for Pour Point of Petroleum Products (Rotational Method)
【原文标准名称】: 石油产品倾点测试方法(旋转法)
【标准号】: ANSI/ASTM D5985-2002
【标准状态】: 作废
【国别】: 美国
ANSI/ASTM D5950-2002 石油产品倾点测试方法(自动倾斜法)
【英文标准名称】: Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
【原文标准名称】: 石油产品倾点测试方法(自动倾斜法)
【标准号】: ANSI/ASTM D5950-2002
【标准状态】: 作废
【国别】: 美国
ANSI/ASTM D1321a-2002 石油蜡针入度的试验方法
【英文标准名称】: Needle Penetration of Petroleum Waxes, Method of Test for (05.01, 15.09)
【原文标准名称】: 石油蜡针入度的试验方法
【标准号】: ANSI/ASTM D1321a-2002
【标准状态】: 作废
【国别】: 美国
ANSI/ASTM D1657-2002 用压力温差比重计测定轻质烃密度或相对密度的试验方法
【英文标准名称】: Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer
【原文标准名称】: 用压力温差比重计测定轻质烃密度或相对密度的试验方法
【标准号】: ANSI/ASTM D1657-2002
【标准状态】: 作废
ANSI/ASTM D1218-2002 测定液态烃的折射率和折射色散的试验方法
【英文标准名称】: Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
【原文标准名称】: 测定液态烃的折射率和折射色散的试验方法
【标准号】: ANSI/ASTM D1218-2002
【标准状态】: 作废
【国别】:
ANSI INCITS/ISO/IEC 14496-5 AMD 1-2002 信息技术.视听对象编码.第5部分:参考软件.补充件:MPEG-4用参考软件
【英文标准名称】: Information technology-Coding of audio-visual objects-Part 5 Reference software AMENDMENT 1 : Reference software for MPEG-4
【原文标准名称】: 信息技术.视听对象编码.第5部分:参考软件.补充件:MPEG-4用参考软件
【标准号】: ANSI INCITS/ISO/IEC
ANSI/AWWA C223-2002 结构钢和不锈钢开口套管
【英文标准名称】: Fabricated Steel and Stainless Steel Tapping Sleeves
【原文标准名称】: 结构钢和不锈钢开口套管
【标准号】: ANSI/AWWA C223-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】: 2002
ANSI/EIA-4899-2002 制定电子元件管理计划用标准
【英文标准名称】: Standard for Preparing an Electronic Components Management Plan
【原文标准名称】: 制定电子元件管理计划用标准
【标准号】: ANSI/EIA-4899-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】
ANSI/ASTM E1822a-2002 折叠椅着火试验方法
【英文标准名称】: Test Method for Fire Testing of Real Scale Stacked Chairs
【原文标准名称】: 折叠椅着火试验方法
【标准号】: ANSI/ASTM E1822a-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】: 2
ANSI/ASTM E2061-2002 铁路运输车辆着火危险评定指南
【英文标准名称】: Guide for Fire Hazard Assessment of Rail Transportation Vehicles
【原文标准名称】: 铁路运输车辆着火危险评定指南
【标准号】: ANSI/ASTM E2061-2002
【标准状态】: 作废
【国别】: 美国
【发
ANSI A14.4-2002 工地用木梯的安全要求
【英文标准名称】: Job-Made Wooden Ladders, Safety Requirements for
【原文标准名称】: 工地用木梯的安全要求
【标准号】: ANSI A14.4-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】: 2002
【
ANSI/AWS C3.3/C 3.3M-2002 关键铜焊组件的设计、制造与检查
【英文标准名称】: Brazed Components, Design, Manufacture, and Inspection of Critical
【原文标准名称】: 关键铜焊组件的设计、制造与检查
【标准号】: ANSI/AWS C3.3/C 3.3M-2002
【标准状态】: 作废
【国别】: 美国
ANSI/AWS B5.14-2002 焊接销售代表资质鉴定规范
【英文标准名称】: Specification for the Qualification of Welding Sales Representatives
【原文标准名称】: 焊接销售代表资质鉴定规范
【标准号】: ANSI/AWS B5.14-2002
【标准状态】: 作废
【国别】: 美国
【
ANSI/SCTE 55-2-2002 数字宽频传送系统:带外传输.第2部分:B模式
【英文标准名称】: Digital Broadband Delivery System: Out of Band Transport Part 2: Mode B
【原文标准名称】: 数字宽频传送系统:带外传输.第2部分:B模式
【标准号】: ANSI/SCTE 55-2-2002
【标准状态】: 作废
【国别】: 美国
ANSI/ASHRAE 87.2-2002 检测螺旋桨式风机可靠性的现场试验法
【英文标准名称】: In-Situ Method of Testing Propeller Fans for Reliability
【原文标准名称】: 检测螺旋桨式风机可靠性的现场试验法
【标准号】: ANSI/ASHRAE 87.2-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】
ANSI/ADA 92-2002 牙科用磷酸盐粘接难熔压模材料
【英文标准名称】: Dental Phosphate-Bonded Refractory Die Materials
【原文标准名称】: 牙科用磷酸盐粘接难熔压模材料
【标准号】: ANSI/ADA 92-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】: 2002
ANSI/ADA 42-2002 牙科磷酸盐粘接铸造精密模
【英文标准名称】: Dental Phosphate-Bonded Casting Investments
【原文标准名称】: 牙科磷酸盐粘接铸造精密模
【标准号】: ANSI/ADA 42-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】: 2002
【实施
ANSI/ADA 2-2002 牙齿石膏粘结熔模铸造
【英文标准名称】: Dental Gypsum-Bonded Casting Investment
【原文标准名称】: 牙齿石膏粘结熔模铸造
【标准号】: ANSI/ADA 2-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】: 2002
【实施或试行日期】:
ANSI/IEEE 95-2002 带直流高压的交流(AC)电机(2300V及以上)的绝缘测试用推荐实施规范
【英文标准名称】: Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) with High Direct Voltage
【原文标准名称】: 带直流高压的交流(AC)电机(2300V及以上)的绝缘测试用推荐实施规范
【标准号】: ANSI/IEEE 95-2002