资料描述
【英文标准名称】: Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, ER309, As-Welded Condition, Primarily Pip
【原文标准名称】: 利用轻便仪器测量立体声播放系统震动衰减特性的方法
【标准号】: ANSI/AWS B2.1-1/8-227-2002
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2002-08-28
【实施或试行日期】:
【发布单位】: 美国国家标准学会(ANSI)
【起草单位】: AWS
【标准类型】: ()
【标准水平】: ()
【中文主题词】:
【英文主题词】: Arc welding;Austenitic steels;Carbon steels;Metal welding;Metal-arc welding;Pipes;Shielded;Stainless steels;Steels;Tungsten;Welding;Welding procedure specification
【摘要】: This standard contains the essential welding variables for carbon steel to austenitic stainless steel in the thickness range of 1/16 through 1-1/2 inch, using manual gas tungsten arc welding. It cites the base metals and operating conditions necessary to make the weldment. The filler metal specifications, and the allowable joint designs for groove and fillet welds. This SWPS was developed primarily for pipe applications.
【中国标准分类号】: M72
【国际标准分类号】: 25_160_10
【页数】:
【正文语种】: 英语
ANSI/AWS B2.2/B 2.2M AMD 1-2010 钎焊流程及性能验证规范
【英文标准名称】: Specification for Brazing Procedure and Performance
【原文标准名称】: 钎焊流程及性能验证规范
【标准号】: ANSI/AWS B2.2/B 2.2M AMD 1-2010
【标准状态】: 现行
【国别】: 美国
【发布日期】:
ANSI/AWS D1.1/D 1.1M-2010 结构焊接代码.钢
【英文标准名称】: Structural Welding Code - Steel
【原文标准名称】: 结构焊接代码.钢
【标准号】: ANSI/AWS D1.1/D 1.1M-2010
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2010
【实施或试行日期】:
ANSI/AWS D3.9-2010 经过油漆底漆的焊接点分类用规范
【英文标准名称】: Specification for Classification of Weld-Through Paint Primers
【原文标准名称】: 经过油漆底漆的焊接点分类用规范
【标准号】: ANSI/AWS D3.9-2010
【标准状态】: 现行
【国别】: 美国
【发布日期
ANSI/AWS B2.1-1-020-94-AMD 1-2010 在焊接或PWHT条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的75%Ar/25%CO2保护助溶剂芯电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1
【英文标准名称】: Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition
【原文标
ANSI/AWS B2.1-1-019-94-AMD 1-2010 在焊接条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的CO2保护助溶剂芯电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或2组)
【英文标准名称】: Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded Condition
【原文标准名称】: 在焊接条件下1/8
ANSI/AWS A5.11/A 5.11M-2010 保护金属电弧焊用镍和镍合金焊接电极规范
【英文标准名称】: Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding
【原文标准名称】: 保护金属电弧焊用镍和镍合金焊接电极规范
【标准号】: ANSI/AWS A5.11/A 5.11M-2010
【标准状态】: 现行
ANSI/AWS B2.1-22-015-2011 在焊接条件下有或没有垫板10到18规格的铝(M/P/S-22至M/P/S-22)钨电极气体电弧焊的标准焊接工艺规范(SWPS)
【英文标准名称】: Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Aluminum (M/P/S-22 to M/P/S-22), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
【原文标准名称】: 在焊接条件下有或没有垫板10到18规格的铝(M/
ANSI/AWS A5.32/A 5.32M-2011 焊接消耗品.熔焊和焊接用气体和气体混合物
【英文标准名称】: Welding Consumables - Gases and Gas Mixtures for Fusion Welding and Allied Processes
【原文标准名称】: 焊接消耗品.熔焊和焊接用气体和气体混合物
【标准号】: ANSI/AWS A5.32/A 5.32M-2011
【标准状态】: 现行
ANSI/AWS D1.4/D 1.4M-2011 结构焊接规范.钢筋
【英文标准名称】: Structural Welding Code - Reinforcing Steel
【原文标准名称】: 结构焊接规范.钢筋
【标准号】: ANSI/AWS D1.4/D 1.4M-2011
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2011
ANSI/AWS F2.3M-2011 透明焊接窗帘和屏幕性能与使用规范
【英文标准名称】: Specification for Use and Performance of Transparent Welding Curtains and Screens
【原文标准名称】: 透明焊接窗帘和屏幕性能与使用规范
【标准号】: ANSI/AWS F2.3M-2011
【标准状态】: 现行
【国别】: 美国
ANSI T1.503-2002 专用数字服务的网络性能参数.定义和测量
【英文标准名称】: Network Performance Parameters for Dedicated Digital Services – Definitions and Measurements
【原文标准名称】: 专用数字服务的网络性能参数.定义和测量
【标准号】: ANSI T1.503-2002
【标准状态】: 现行
【国别
ANSI/I3A IT4.14-2002 摄影(处理).黑白胶片和底板显象液.颗粒度估算方法
【英文标准名称】: Photography (Processing) – Developers for Black-and-White Films and Plates – Method for Graininess Evaluation
【原文标准名称】: 摄影(处理).黑白胶片和底板显象液.颗粒度估算方法
【标准号】: ANSI/I3A IT4.14-2002
【标准状态】:
ANSI/AAMI EC13-2002 医疗电气设备.第2-27部分:心电图仪用监控设备的基本安全和性能的特殊要求
【英文标准名称】: Medical electrical equipment - Part 2-27: Particular requirements for basic safety and essential performance of electrocardiographic monitoring equipment
【原文标准名称】: 医疗电气设备.第2-27部分:心电图仪用监控设备的基本安全和性能的特殊要求
【
ANSI Z80.7-2002 眼科学.眼内透镜
【英文标准名称】: Ophthalmics – Intraocular Lenses
【原文标准名称】: 眼科学.眼内透镜
【标准号】: ANSI Z80.7-2002
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2002-09-20
【实施或试行日期】:
ANSI/ADA 74-2002 牙医的工作凳
【英文标准名称】: Dental Operator’s Stools
【原文标准名称】: 牙医的工作凳
【标准号】: ANSI/ADA 74-2002
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2002-03-01
【实施或试行日期】:
【发布单位
ANSI/AAMI/ISO 10993-12-2002 医疗器械的生物评价.第12部分:样品制备和标样
【英文标准名称】: Biological Evaluation of Medical Devices - Part 12: Sample Preparation and Reference Materials
【原文标准名称】: 医疗器械的生物评价.第12部分:样品制备和标样
【标准号】: ANSI/AAMI/ISO 10993-12-2002
【标准状态】: 作废
ANSI/IEEE 1588-2002 网络测量和控制系统用精密时钟同步协议
【英文标准名称】: Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
【原文标准名称】: 网络测量和控制系统用精密时钟同步协议
【标准号】: ANSI/IEEE 1588-2002
【标准状态】: 作废
【国别】:
ANSI/NEMA 61800-1-2002 可调速电力驱动系统.第1部分:一般要求.低压可调速直流电驱动系统的额定值规范
【英文标准名称】: Adjustable Speed Electrical Power Drive Systems - Part 1: General Requirements - Rating Specifications for Low Voltage Adjustable Speed d.c. Power Drive Systems
【原文标准名称】: 可调速电力驱动系统.第1部分:一般要求.低压可调速直流电驱动系统的额定值规范
ANSI SNT 101-2002 动力工具.便携式压缩空气驱动的紧固件旋入工具的安全要求
【英文标准名称】: Power Tools – Portable, Compressed Air Actuated, Fastener Driving Tools – Safety Requirements for
【原文标准名称】: 动力工具.便携式压缩空气驱动的紧固件旋入工具的安全要求
【标准号】: ANSI SNT 101-2002
【标准状态】: 现行
ANSI C29.17-2001 合成线柱型绝缘子
【英文标准名称】: Insulators - Composite-Line Post Type
【原文标准名称】: 合成线柱型绝缘子
【标准号】: ANSI C29.17-2001
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2002-02-12
【实施或试行日
ANSI C37.32-2002 高压空气断路开关、断路器开关、错误初始开关、接地开关、总线支架和附件控制电压范围.优选额定值、制造指南和规范一览表
【英文标准名称】: High-Voltage Air Disconnect Switches Interrupter Switches, Fault Initiating Switches, Grounding Switches, Bus supports and Accessories Control Voltage Ranges – Schedule of Preferred Ratings, Construction Guidelines and Specifications
ANSI C79.1-2002 玻璃灯泡名词术语.电灯玻璃灯泡
【英文标准名称】: Nomenclature for Glass Bulbs – Intended for Use with Electric Lamps
【原文标准名称】: 玻璃灯泡名词术语.电灯玻璃灯泡
【标准号】: ANSI C79.1-2002
【标准状态】: 现行
【国别】: 美国
【发布
ANSI/IEEE 1585-2002 电压波动补偿用中等电压(1-35kV)系列电子设备的功能规范指南
【英文标准名称】: Guide for the Functional Specification of Medium Voltage (1 – 35 kV) Electronic Series Devices for Compensation of Voltage Fluctuations
【原文标准名称】: 电压波动补偿用中等电压(1-35kV)系列电子设备的功能规范指南
【标准号】: ANSI/IEEE 158
ANSI/ICEA S-90-661-2002 通信配线系统中使用的独立无屏蔽室内绞线对电缆.技术要求
【英文标准名称】: Individually Unshielded Twisted Pair Indoor Cables for Use In Communication Wiring Systems – Technical Requirements
【原文标准名称】: 通信配线系统中使用的独立无屏蔽室内绞线对电缆.技术要求
【标准号】: ANSI/ICEA S-90-661-2002
ANSI/ICEA S-85-625-2002 空芯聚烯烃绝缘铜导体通信电缆的技术要求
【英文标准名称】: Aircore, Polyolefin Insulated, Copper Conductor Telecommunications Cable – Technical Requirements
【原文标准名称】: 空芯聚烯烃绝缘铜导体通信电缆的技术要求
【标准号】: ANSI/ICEA S-85-625-2002
【标准状态】: 作废
ANSI/ICEA S-84-608-2002 聚烯烃绝缘填充铜导线通信电缆的技术要求
【英文标准名称】: Telecommunications Cable Filled, Polyolefin Insulated, Copper Conductor – Technical Requirements
【原文标准名称】: 聚烯烃绝缘填充铜导线通信电缆的技术要求
【标准号】: ANSI/ICEA S-84-608-2002
【标准状态】: 作废
ANSI/ANS 56.8-2002 核反应堆.安全壳系统泄漏测试要求
【英文标准名称】: Nuclear Reactors – Containment System Leakage Testing Requirements
【原文标准名称】: 核反应堆.安全壳系统泄漏测试要求
【标准号】: ANSI/ANS 56.8-2002
【标准状态】: 现行
【国别】: 美国
ANSI/NFPA 17-2002 干粉灭火装置
【英文标准名称】: Dry Chemical Extinguishing Systems
【原文标准名称】: 干粉灭火装置
【标准号】: ANSI/NFPA 17-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】: 2002
【实施或试行日期】:
ANSI O5.1-2002 木杆.规范和尺寸
【英文标准名称】: Wood Poles - Specifications and Dimensions
【原文标准名称】: 木杆.规范和尺寸
【标准号】: ANSI O5.1-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】: 2002
【实施或试行日期】:
SAE AS7110 Nadcap Requirements for Welding/Brazing
Product Code:SAE AS7110
Title:Nadcap Requirements for Welding/Brazing
Issuing Committee:Nadcap Management Council
Scope:This Aerospace Standard (AS) establishes the requirements for suppliers of Welding/Brazing Services to be accredited by