资料描述
Product Code:SAE ARP4727
Title:Gland Design, Computation of Seal Squeeze and Gland Volume
Issuing Committee:A-6c2 Seals Committee
Scope: This SAE Aerospace Recommended Practice (ARP) presents two BASIC language computer programs to promote and standardize the computation of installed O-ring cross-section deflection hereafter referred to as 'squeeze' and the computation of gland volume. The two programs were written with line numbers and without use of any system specific BASIC commands to allow usage with as many systems as possible with a minimum of editing. The programs support entry of customary U.S. or metric dimensions.
SAE ARP9134 Supply Chain Risk Management Guidelines
Product Code:SAE ARP9134
Title:Supply Chain Risk Management Guidelines
Issuing Committee:G-14 Americas Aerospace Quality Standards Committee (Aaqsc)
Scope:Supply Chain Risk Management (SCRM), defined in this guideline, can be applied proact
SAE AS85049/61 Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (For Mil- C-27599 Connectors)
Product Code:SAE AS85049/61
Title:Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (For Mil- C-27599 Connectors)
Issuing Committee:Ae-8c1 Connectors Committee
Scope:No scope available.
SAE ARP712 Galley Lighting
Product Code:SAE ARP712
Title:Galley Lighting
Issuing Committee:A-20ac Crew Station And Interior Lighting Committee
Scope:This SAE Aerospace Recommended Practice (ARP) provides minimum standards and environmental design requirement recommen
SAE AIR4250 Electronic Engine Control Specifications and Standards
Product Code:SAE AIR4250
Title:Electronic Engine Control Specifications and Standards
Issuing Committee:E-36 Electronic Engine Controls Committee
Scope:This report lists documents that aid and govern the design, development, and utilization
SAE AMS2416 Plating, Nickel-Cadmium Diffused
Product Code:SAE AMS2416
Title:Plating, Nickel-Cadmium Diffused
Issuing Committee:Ams B Finishes Processes And Fluids Committee
Scope:This specification covers the engineering requirements for an electrodeposit of cadmium into an electrodep
SAE AMS4650 Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings 98cu 1.9be Solution Heat Treated Tb00 (A)
Product Code:SAE AMS4650
Title:Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings 98cu 1.9be Solution Heat Treated Tb00 (A)
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers one type of copper-berylli
SAE AMS2410 Plating, Silver, Nickel Strike, High Bake
Product Code:SAE AMS2410
Title:Plating, Silver, Nickel Strike, High Bake
Issuing Committee:Ams B Finishes Processes And Fluids Committee
Scope:This specification covers the engineering requirements for electrodeposition of silver on other m
SAE AMS6518 Steel Sheet, Strip, and Plate, Maraging, 19ni 3.0mo 1.4ti 0.10al Double Vacuum Melted, Solution Heat Treated
Product Code:SAE AMS6518
Title:Steel Sheet, Strip, and Plate, Maraging, 19ni 3.0mo 1.4ti 0.10al Double Vacuum Melted, Solution Heat Treated (Cancelled Mar 2004)
Issuing Committee:Ams E Carbon And Low Alloy Steels Committee
Scope:This specif
SAE AMS5062 Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum
Product Code:SAE AMS5062
Title:Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum
Issuing Committee:Ams E Carbon And Low Alloy Steels Committee
Scope:This specification covers low-carbon steel in the form
SAE AMS5061 Steel, Low Carbon, Bars and Wire 0.08 to 0.20 C
Product Code:SAE AMS5061
Title:Steel, Low Carbon, Bars and Wire 0.08 to 0.20 C
Issuing Committee:Ams E Carbon And Low Alloy Steels Committee
Scope:This specification covers a low-carbon steel in the form of bars and wire 0.750 inch (19.05 m
SAE AMS5020 Steel Bars, Forgings, and Tubing, Free-Cutting, 1.5mn 0.25pb (0.32-0.39c) (11l37)
Product Code:SAE AMS5020
Title:Steel Bars, Forgings, and Tubing, Free-Cutting, 1.5mn 0.25pb (0.32-0.39c) (11l37)
Issuing Committee:Ams E Carbon And Low Alloy Steels Committee
Scope:This specification covers a leaded carbon steel in the form
SAE AMS2755 Nitriding, Molten Salt Bath (NONCURRENT Mar 2004)
Product Code:SAE AMS2755
Title:Nitriding, Molten Salt Bath (NONCURRENT Mar 2004)
Issuing Committee:Ams B Finishes Processes And Fluids Committee
Scope:This specification covers the engineering requirements for producing a thin carbide-beari
SAE AMS2503 Black Finishing, Low Baking Enamel (NONCURRENT Mar 2004)
Product Code:SAE AMS2503
Title:Black Finishing, Low Baking Enamel (NONCURRENT Mar 2004)
Issuing Committee:Ams B Finishes Processes And Fluids Committee
Scope: This specification covers the engineering requirements for finishing aircraft par
SAE J04AA Training for Chemical Tank Process Operators (Parts Cleaners)
Product Code:SAE J04AA
Title:Training for Chemical Tank Process Operators (Parts Cleaners)
Issuing Committee:Ams J Aircraft Maintenance Chemicals And Materials Committee
Scope:
Rationale:
SAE AS9316 Screw, Machine - Hexagon Head, Slotted, Full Shank, Alloy Steel, Uns K14675, 135 Ksi Min, .1900-32 Uns-3a
Product Code:SAE AS9316
Title:Screw, Machine - Hexagon Head, Slotted, Full Shank, Alloy Steel, Uns K14675, 135 Ksi Min, .1900-32 Uns-3a
Issuing Committee:E-25 General Standards For Aerospace And Propulsion Systems
Scope:No scope available.
SAE AS3613 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Cobalt-Nickel Alloy, Uns R30159,
Product Code:SAE AS3613
Title:Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Cobalt-Nickel Alloy, Uns R30159, 260 Ksi Min
Issuing Committee:E-25 General Standards For Aerospace And Propulsion Systems
Scope:No sc
SAE AS3622 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, Cobalt-Nickel Alloy, Uns
Product Code:SAE AS3622
Title:Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, Cobalt-Nickel Alloy, Uns R30159, 260 Ksi Min
Issuing Committee:E-25 General Standards For Aerospace And Propulsion Systems
Sc
SAE AS3623 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cobalt-Nickel Alloy, Uns R30159, 260
Product Code:SAE AS3623
Title:Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cobalt-Nickel Alloy, Uns R30159, 260 Ksi Min
Issuing Committee:E-25 General Standards For Aerospace And Propulsion Systems
Scope:No scope
SAE AS3611 Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cobalt-Nickel Alloy Uns R30159, 260 Ksi Min
Product Code:SAE AS3611
Title:Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cobalt-Nickel Alloy Uns R30159, 260 Ksi Min
Issuing Committee:E-25 General Standards For Aerospace And Propulsion Systems
Scope:No scope available.
SAE AS1132 Bolts, Screws and Nuts - External Wrenching Unj Thread, Inch - Design Standard
Product Code:SAE AS1132
Title:Bolts, Screws and Nuts - External Wrenching Unj Thread, Inch - Design Standard
Issuing Committee:E-25 General Standards For Aerospace And Propulsion Systems
Scope:The scope of this document is to define the fol