MIL-PRF-907E (AMENDMENT 2), PERFORMANCE SPECIFICATION: ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE (10 MAY 1996) [SUPERSEDING MIL-A-907D]., This amendment forms a part of MIL-A-907E, dated 18 June 1985, and is approved for use by all Departments and Agenc
MIL-PRF-907E (AMENDMENT 1), PERFORMANCE SPECIFICATION: ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE (13 JAN 1993) [SUPERSEDING MIL-A-907D]., This amendment forms a part of MIL-A-907E, dated 18 June 1985, and is approved for use by the Naval Sea Systems Com
MIL-PRF-6106L (AMENDMENT 5), PERFORMANCE SPECIFICATION, RELAYS, ELECTROMAGNETIC GENERAL SPECIFICATION FOR (29 JUL 2003) [SUPERSEDING MIL-R-6106J]., This amendment forms a part of MIL-PRF-6106L, dated 10 November 2000, and is approved for use by all Depart
MIL-PRF-5606H (AMENDMENT 3), PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (7 SEP 2006)., This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for
MIL-PRF-4556F (AMENDMENT 1), PERFORMANCE SPECIFICATION, COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (16 FEB 1999)., This amendment forms a part of MIL-PRF-4556F, dated 15 December 1998, and is approved for use by all Departments and Agencies of t
MIL-PRF-3572B (AMENDMENT 1), PERFORMANCE SPECIFICATION, LUBRICANT, COLLOIDAL GRAPHITE IN OIL (30 SEP 2002) [SUPERSEDING MIL-L-3572A]., This amendment forms a part of MIL-PRF-3572B, dated 21 January 2000, and is approved for use by all departments and agen
MIL-PRF-3135G (AMENDMENT 4), PERFORMANCE SPECIFICATION, DECK COVERING UNDERLAY MATERIALS (14 NOV 1986)., This amendment forms a part of MIL-D-3135G, dated 21 March 1983, and is approved for use by all Departments and Agencies of the Department of Defense.
MIL-STD-1501B (NOTICE 1), MILITARY STANDARD: CHROMIUM PLATING, LOW EMBRITTLEMENT, ELECTRO-DEPOSITION (14 DEC 1984)., To all holders of MIL-STD-1501B(USAF): The following pages of MIL-STD-1501B(USAF) have been revised and supersede the pages listed:
【英文标准名称】: Road service area maintenance equipment - Part 4: Delivery acceptance of the machines by the users; German version EN 15436-4:2009 【原文标准名称】: 公路服务区的维修设备.第4部分:经由用户的机器配送承兑.德文版本EN 15436-4-2009 【标准号】: DIN
【英文标准名称】: Safety of woodworking machines - One side moulding machines with rotating tool - Part 1 : single spindle vertical moulding machines. 【原文标准名称】: 木工机械的安全性.带旋转工具的单面铸模机.第1部分:单轴垂直铸模机 【标准号】: NF E64-601-1/IN
【英文标准名称】: Ambient air - Gas phase titration - Calibration of analysers for ozone 【原文标准名称】: 环境空气.气相滴定.臭氧分析仪的校准 【标准号】: BS ISO 15337-2009 【标准状态】: 现行 【国别】: 英国
【英文标准名称】: Information Technology - Computer graphics and image processing - The Virtual Reality Modeling Language - Part 1: Functional specification and UTF-8 encoding - Amendment 1: Enhanced interoperability 【原文标准名称】: 信息技术.计算机图形与
【英文标准名称】: General requirements for environmental tests of control and instrumentation equipment for marine use 【原文标准名称】: 船用控制和仪器仪表设备环境试验的通用要求 【标准号】: JIS F0807-1999 【标准状态】: 作废
【英文标准名称】: Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe 【原文标准名称】: 聚乙烯/铝/聚乙烯和交联聚乙烯/铝/交联聚乙烯复合压力管用金属内插件规范
【英文标准名称】: Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators; German version EN 60730-2-11:1993/A11:2005 【原文标准名称】: 家用和类似用途自动电控装置.第2-11部分:能量调节器的特殊要求
【英文标准名称】: Implants for surgery - Partial and total hip joint prostheses - Part 9: Determination of resistance to torque of head fixation of stemmed femoral components 【原文标准名称】: 外科植入物.部分和全部髋关节假肢.第9部分:头固定逆行股骨部件的抗扭曲力的测定
Product Code:SAE AMS3100/2 Title:Adhesion Promoter for Polysulfide Sealing Compounds Non-Restricted Solvent (Cancelled Aug 1994) Issuing Committee:Ams G9 Aerospace Sealing Committee Scope: This specification covers one type of adhesion prom
【英文标准名称】: Mechanical standardization of semiconductor devices - Part 6-12: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for fine-pitch land grid array (FLGA); Rectangular type (IE
Product Code:SAE AMS3199 Title:Sponge, Chloroprene (CR) Rubber, Firm Issuing Committee:Ams Ce Elastomers Committee Scope:This specification covers a chloroprene (CR) rubber sponge in the form of sheet, strip, molded shapes, or other forms,
【英文标准名称】: Use of network techniques in project management. Guide to resource analysis and cost control 【原文标准名称】: 网络技术在项目管理中的应用.第4部分:资源分析和成本核算指南 【标准号】: BS 6046 Pt.4-1981 【标准状态】: 作废
【英文标准名称】: Measurement and control; electrical temperature sensors; references-tables for nickel resistors for resistance thermometers 【原文标准名称】: 测量.控制.调节.电气的温度接受器.电阻温度计用镍的电阻测量基值 【标准号】: DIN 43760-1980
MIL-PRF-9854C (AMENDMENT 1)
MIL-PRF-9854C (AMENDMENT 1), PERFORMANCE SPECIFICATION TECHNICAL MANUALS: STRUCTURAL REPAIR (AIRCRAFT) (11 FEB 2002) [SUPERSEDING MIL-M-9854B].
MIL-PRF-907E (AMENDMENT 2)
MIL-PRF-907E (AMENDMENT 2), PERFORMANCE SPECIFICATION: ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE (10 MAY 1996) [SUPERSEDING MIL-A-907D]., This amendment forms a part of MIL-A-907E, dated 18 June 1985, and is approved for use by all Departments and Agenc
MIL-PRF-907E (AMENDMENT 1)
MIL-PRF-907E (AMENDMENT 1), PERFORMANCE SPECIFICATION: ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE (13 JAN 1993) [SUPERSEDING MIL-A-907D]., This amendment forms a part of MIL-A-907E, dated 18 June 1985, and is approved for use by the Naval Sea Systems Com
MIL-PRF-6106L (AMENDMENT 5)
MIL-PRF-6106L (AMENDMENT 5), PERFORMANCE SPECIFICATION, RELAYS, ELECTROMAGNETIC GENERAL SPECIFICATION FOR (29 JUL 2003) [SUPERSEDING MIL-R-6106J]., This amendment forms a part of MIL-PRF-6106L, dated 10 November 2000, and is approved for use by all Depart
MIL-PRF-5606H (AMENDMENT 3)
MIL-PRF-5606H (AMENDMENT 3), PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (7 SEP 2006)., This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for
MIL-PRF-4556F (AMENDMENT 1)
MIL-PRF-4556F (AMENDMENT 1), PERFORMANCE SPECIFICATION, COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (16 FEB 1999)., This amendment forms a part of MIL-PRF-4556F, dated 15 December 1998, and is approved for use by all Departments and Agencies of t
MIL-PRF-3572B (AMENDMENT 1)
MIL-PRF-3572B (AMENDMENT 1), PERFORMANCE SPECIFICATION, LUBRICANT, COLLOIDAL GRAPHITE IN OIL (30 SEP 2002) [SUPERSEDING MIL-L-3572A]., This amendment forms a part of MIL-PRF-3572B, dated 21 January 2000, and is approved for use by all departments and agen
MIL-PRF-3135G (AMENDMENT 4)
MIL-PRF-3135G (AMENDMENT 4), PERFORMANCE SPECIFICATION, DECK COVERING UNDERLAY MATERIALS (14 NOV 1986)., This amendment forms a part of MIL-D-3135G, dated 21 March 1983, and is approved for use by all Departments and Agencies of the Department of Defense.
MIL-PRF-122A (AMENDMENT 4)
MIL-PRF-122A (AMENDMENT 4), PERFORMANCE SPECIFICATION, RESISTORS, FIXED, PRECISION, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (24 APR 1995) [SUPERSEDING MIL-R-122] [S/S BY DSCC DWGS 97009, 97010 AND 97011].
MIL-PRF-122A (AMENDMENT 4)
MIL-PRF-122A (AMENDMENT 4), PERFORMANCE SPECIFICATION, RESISTORS, FIXED, PRECISION, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (24 APR 1995) [SUPERSEDING MIL-R-122] [S/S BY DSCC DWGS 97009, 97010 AND 97011].
MIL-STD-1501B (NOTICE 1)
MIL-STD-1501B (NOTICE 1), MILITARY STANDARD: CHROMIUM PLATING, LOW EMBRITTLEMENT, ELECTRO-DEPOSITION (14 DEC 1984)., To all holders of MIL-STD-1501B(USAF): The following pages of MIL-STD-1501B(USAF) have been revised and supersede the pages listed:
MIL-STD-2104 (NOTICE 1)
MIL-STD-2104 (NOTICE 1), MILITARY STANDARD: WELDING, TUNGSTEN ARC, GAS, MANUAL (GTAW-MA) REQUIREMENTS FOR (25 FEB 1993) [SUPERSEDING WS20642] [NO S/S DOCUMENT]., MIL-STD-2104(0S), dated 7 March 1990, is hereby canceled without replacement.
GB/T10094-1988 正态分布分位数Xp置信区间
【英文标准名称】:TheconfidenceintervalofquantileXpfornormaldistribution
【中文标准名称】:正态分布分位数Xp置信区间
【标准号】:GB/T10094-1988
【标准状态】:被代替
【发布日期】:1988-12-10
【实施日期】:1989-10-01
【发布部门】:国家技术监督局
【起草单位】:全国统计方法应用标准化技术委员会可靠性统计分委员会工作组
【起草人】:王铃铃
GB/Z21214-2007 行输出变压器用聚酯薄膜
【英文标准名称】:Polyesterfilmforflybacktransformer
【中文标准名称】:行输出变压器用聚酯薄膜
【标准号】:GB/Z21214-2007
【标准状态】:现行
【发布日期】:2007-12-03
【实施日期】:
【发布部门】:中华人民共和国国家质量监督检验检疫总局;中国国家标准化管理委员会
【起草单位】:东方绝缘材料股份有限公司
【起草人】:罗春明;赵平
【标准技术委员会】:全国绝缘材
GB/T19895.1-2005 室内放映 幻灯、投影放映设备银幕照度的测定方法
【英文标准名称】:Projectioninindoorrooms—Screenilluminationtestforstillprojectors
【中文标准名称】:室内放映 幻灯、投影放映设备银幕照度的测定方法
【标准号】:GB/T19895.1-2005
【标准状态】:现行
【发布日期】:2005-09-09
【实施日期】:2006-04-01
【发布部门】:中华人民共和国国家质量监督检验检疫总局;中国国家标准化管理委员会
【起草单
DIN EN 15436-4-2010 公路服务区的维修设备.第4部分:经由用户的机器配送承兑.德文版本EN 15436-4-2009
【英文标准名称】: Road service area maintenance equipment - Part 4: Delivery acceptance of the machines by the users; German version EN 15436-4:2009
【原文标准名称】: 公路服务区的维修设备.第4部分:经由用户的机器配送承兑.德文版本EN 15436-4-2009
【标准号】: DIN
NF E64-601-1/IN1-2010 木工机械的安全性.带旋转工具的单面铸模机.第1部分:单轴垂直铸模机
【英文标准名称】: Safety of woodworking machines - One side moulding machines with rotating tool - Part 1 : single spindle vertical moulding machines.
【原文标准名称】: 木工机械的安全性.带旋转工具的单面铸模机.第1部分:单轴垂直铸模机
【标准号】: NF E64-601-1/IN
ASTM F1511-2009 船泵设施用机械密封件的标准规范
【英文标准名称】: Standard Specification for Mechanical Seals for Shipboard Pump Applications
【原文标准名称】: 船泵设施用机械密封件的标准规范
【标准号】: ASTM F1511-2009
【标准状态】: 现行
【国别】: 美国
BS ISO 15337-2009 环境空气.气相滴定.臭氧分析仪的校准
【英文标准名称】: Ambient air - Gas phase titration - Calibration of analysers for ozone
【原文标准名称】: 环境空气.气相滴定.臭氧分析仪的校准
【标准号】: BS ISO 15337-2009
【标准状态】: 现行
【国别】: 英国
ANSI A108.01-2005 一般要求:其它贸易的地表和制备
【英文标准名称】: General Requirements: Subsurfaces and Preparations by Other Trades
【原文标准名称】: 一般要求:其它贸易的地表和制备
【标准号】: ANSI A108.01-2005
【标准状态】: 现行
【国别】: 美国
【
ANSI/INCITS/ISO/IEC 14772-1AMD 1-2004 信息技术.计算机图形与图像处理.虚拟真实建模语言.第1部分:功能规范和UTF-8编码.修改件1:增强的互操作性
【英文标准名称】: Information Technology - Computer graphics and image processing - The Virtual Reality Modeling Language - Part 1: Functional specification and UTF-8 encoding - Amendment 1: Enhanced interoperability
【原文标准名称】: 信息技术.计算机图形与
ANSI/NFPA 1031-2003 消防检查员的职业资格鉴定
【英文标准名称】: Professional Qualifications for Fire Inspector
【原文标准名称】: 消防检查员的职业资格鉴定
【标准号】: ANSI/NFPA 1031-2003
【标准状态】: 作废
【国别】: 美国
【发布日期】: 2003
JIS F0807-1999 船用控制和仪器仪表设备环境试验的通用要求
【英文标准名称】: General requirements for environmental tests of control and instrumentation equipment for marine use
【原文标准名称】: 船用控制和仪器仪表设备环境试验的通用要求
【标准号】: JIS F0807-1999
【标准状态】: 作废
JIS C3664-1998 绝缘电缆用导线
【英文标准名称】: Conductors of insulated cables
【原文标准名称】: 绝缘电缆用导线
【标准号】: JIS C3664-1998
【标准状态】: 作废
【国别】: 日本
【发布日期】: 1998-03-20
【实施或试行日期】:
SAE AMS5558 Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Thin Wall, Solution He
Product Code:SAE AMS5558
Title:Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Thin Wall, Solution Heat Treated
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification
ANSI/ASTM F1974-2001 聚乙烯/铝/聚乙烯和交联聚乙烯/铝/交联聚乙烯复合压力管用金属内插件规范
【英文标准名称】: Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
【原文标准名称】: 聚乙烯/铝/聚乙烯和交联聚乙烯/铝/交联聚乙烯复合压力管用金属内插件规范
DIN EN 60730-2-11/A11-2005 家用和类似用途自动电控装置.第2-11部分:能量调节器的特殊要求
【英文标准名称】: Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators; German version EN 60730-2-11:1993/A11:2005
【原文标准名称】: 家用和类似用途自动电控装置.第2-11部分:能量调节器的特殊要求
ISO 7206-9-1994 外科植入物.部分和全部髋关节假肢.第9部分:头固定逆行股骨部件的抗扭曲力的测定
【英文标准名称】: Implants for surgery - Partial and total hip joint prostheses - Part 9: Determination of resistance to torque of head fixation of stemmed femoral components
【原文标准名称】: 外科植入物.部分和全部髋关节假肢.第9部分:头固定逆行股骨部件的抗扭曲力的测定
SAE AMS3100/2 Adhesion Promoter for Polysulfide Sealing Compounds Non-Restricted Solvent (Cancelled Aug 1994)
Product Code:SAE AMS3100/2
Title:Adhesion Promoter for Polysulfide Sealing Compounds Non-Restricted Solvent (Cancelled Aug 1994)
Issuing Committee:Ams G9 Aerospace Sealing Committee
Scope: This specification covers one type of adhesion prom
DIN EN 60191-6-12-2003 半导体器件的机械标准化.第6-12部分:表面安装半导体器件封装外形图纸制备的一般规则.小节距栅极矩阵列的设计指南 (IEC 60191-6-122002); 德文版本 EN 60191-6-12
【英文标准名称】: Mechanical standardization of semiconductor devices - Part 6-12: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for fine-pitch land grid array (FLGA); Rectangular type (IE
SAE AMS3199 Sponge, Chloroprene (CR) Rubber, Firm
Product Code:SAE AMS3199
Title:Sponge, Chloroprene (CR) Rubber, Firm
Issuing Committee:Ams Ce Elastomers Committee
Scope:This specification covers a chloroprene (CR) rubber sponge in the form of sheet, strip, molded shapes, or other forms,
BS 6046 Pt.4-1981 网络技术在项目管理中的应用.第4部分:资源分析和成本核算指南
【英文标准名称】: Use of network techniques in project management. Guide to resource analysis and cost control
【原文标准名称】: 网络技术在项目管理中的应用.第4部分:资源分析和成本核算指南
【标准号】: BS 6046 Pt.4-1981
【标准状态】: 作废
DIN 43760-1980 测量.控制.调节.电气的温度接受器.电阻温度计用镍的电阻测量基值
【英文标准名称】: Measurement and control; electrical temperature sensors; references-tables for nickel resistors for resistance thermometers
【原文标准名称】: 测量.控制.调节.电气的温度接受器.电阻温度计用镍的电阻测量基值
【标准号】: DIN 43760-1980
DIN 4227-5-1979 预应力混凝土.预应力管中水泥灰浆的压力
【英文标准名称】: Prestressed Concrete; Injection of Cement Mortar into Prestressing Concrete Ducts
【原文标准名称】: 预应力混凝土.预应力管中水泥灰浆的压力
【标准号】: DIN 4227-5-1979
【标准状态】: 作废
【国别】: 德国