MIL-HDBK-113C

MIL-HDBK-113C, MILITARY HANDBOOK, GUIDE FOR SELECTION OF LUBRICANTS, FUNCTIONAL FLUIDS, PRESERVATIVES AND SPECIALTY PRODUCTS FOR USE IN GROUND EQUIPMENT SYSTEMS (24 APR 1989)., This handbook establishes design guides for selection of suitable lubricant

MIL-HDBK-113C

MIL-HDBK-113C (NOTICE 1), MILITARY HANDBOOK, GUIDE FOR SELECTION OF LUBRICANTS, FUNCTIONAL FLUIDS, PRESERVATIVES AND SPECIALTY PRODUCTS FOR USE IN GROUND EQUIPMENT SYSTEMS (12 APR 2004)., MIL-HDBK-113C, dated 24 April 1989, has been reviewed and determ

MIL-HDBK-112

MIL-HDBK-112, MILITARY HANDBOOK: PUMPS, SELECTION AND APPLICATION (18 JAN 1978)., MIL-HDBK-112, dated 23 December 1964, is hereby canceled without replacement.

MIL-HDBK-110

MIL-HDBK-110 (NOTICE-1), MILITARY HANDBOOK, CHAINS, POWER TRANSMISSION AND CONVEYING, APPLICATION, INSTALLATION, AND MAINTENANCE (1 FEB 1982).

MIL-HDBK-109

MIL-HDBK-109 (H-109), QUALITY CONTROL AND RELIABILITY - STATISTICAL PROCEDURES FOR DETERMINING VALIDITY OF SUPPLIERS ATTRIBUTES INSPECTION OF. This purpose of this handbook is to provide appropriate statistical tests and tables of critical values to De

MIL-HDBK-108

This handbook (interim) was developed by the Bureau of Naval E=Weapons, Department of the Navy on behalf of the Office of the Assistant Secretary of Defense (Supply/Logistics). It was prepared to meet a growing need for the use of standard sampling pla

MIL-HDBK-107

MIL-HDBK-107 (NOTICE 1), INSPECTION QUALITY CONTROL SINGLE LEVEL CONTINUOUS SAMPLING PROCEDURES & TABLES FOR INSPECTION BY ATTRIBUTES (11 FEB 1983) [S/S BY MIL-STD-1235]., MIL-HDBK-107, dated 30 April 1959, is hereby canceled. MIL-STD-1235 provides

MIL-HDBK-103AD

MIL-HDBK-103AD, DEPARTMENT OF DEFENSE HANDBOOK: LIST OF STANDARD MICROCIRCUIT DRAWINGS (26 MAR 2009)., The Standard Microcircuit Drawing Program (SMDP) is directly under the auspices of the DoD Parts Management Program (PMP). The PMP is implemented by

MIL-HDBK-103AB

MIL-HDBK-103AB, DEPARTMENT OF DEFENSE HANDBOOK: LIST OF STANDARD MICROCIRCUIT DRAWINGS (19 MAR 2008)., The Standard Microcircuit Drawing Program (SMDP) is directly under the auspices of the DoD Parts Management Program (PMP). The PMP is implemented by

MIL-HDBK-103AA

MIL-HDBK-103AA, DEPARTMENT OF DEFENSE HANDBOOK: LIST OF STANDARD MICROCIRCUIT DRAWINGS (19 SEP 2007)., The Standard Microcircuit Drawing Program (SMDP) is directly under the auspices of the DoD Parts Management Program (PMP). The PMP is implemented by

ASTM E473-2010 热分析和流变学相关标准术语

【英文标准名称】: Standard Terminology Relating to Thermal Analysis and Rheology
【原文标准名称】: 热分析和流变学相关标准术语
【标准号】: ASTM E473-2010
【标准状态】: 现行
【国别】: 美国
【发布日期】:

JIS K5551-2008 金属结构用耐用防腐涂料

【英文标准名称】: Heavy-duty anticorrosive paints for metal structures
【原文标准名称】: 金属结构用耐用防腐涂料
【标准号】: JIS K5551-2008
【标准状态】: 现行
【国别】: 日本
【发布日期】: 2008-01-20<

GB/T 4301-1992 船用电磁计程仪通用技术条件--国家标准全文数据库

【英文标准名称】: General specification for marine electromagnetic logs
【中文标准名称】: 船用电磁计程仪通用技术条件
【标准号】: GB/T 4301-1992
【标准状态】: 被代替
【发布日期】: 1984-04-04
【实施日期】:

GB/T 14799-2005 土工布及其有关产品　有效孔径的测定　干筛法--国家标准全文数据库

【英文标准名称】: Geotextiles and geotextile-related products—Determination of the effective opening size—Dry sieving method
【中文标准名称】: 土工布及其有关产品　有效孔径的测定　干筛法
【标准号】: GB/T 14799-2005
【标准状态】: 现行

BS EN ISO 15877-1-2009 冷热水装置用塑料管道系统.氯化聚氯乙烯(PVC-C).第1部分:概述

【英文标准名称】: Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1:General
【原文标准名称】: 冷热水装置用塑料管道系统.氯化聚氯乙烯(PVC-C).第1部分:概述
【标准号】: BS EN ISO 15877-1-2009

SAE AIR5648 Fuel Versus Oxygen: Evaluations and Considerations

Product Code:SAE AIR5648
Title:Fuel Versus Oxygen: Evaluations and Considerations
Issuing Committee:A-10 Aircraft Oxygen Equipment Committee
Scope:Specific Federal Aviation Regulations (FAR) define oxygen system requirements for an in-fligh

ISO 15547-2-2005 石油、石化和天然气工业.板式热交换器.第2部分:铜焊铝板热交换器

【英文标准名称】: Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers
【原文标准名称】: 石油、石化和天然气工业.板式热交换器.第2部分:铜焊铝板热交换器
【标准号】: ISO 15547-2-200

ASTM A 962/A 962M-2006 低温至蠕变范围内任何温度下使用的钢紧固件或紧固件材料或两者同时存在的通用要求用标准规范

【英文标准名称】: Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
【原文标准名称】: 低温至蠕变范围内任何温度下使用的钢紧固件或紧固件材料或两者同时存在的通用要求用标准

GB/T 25305-2010 缝焊机--国家标准全文数据库

【英文标准名称】: Seam welding machines
【中文标准名称】: 缝焊机
【标准号】: GB/T 25305-2010
【标准状态】: 现行
【发布日期】: 2010-11-10
【实施日期】: 2011-05-01
【发布部门】:

EN 54-10/A1-2005 火灾探测和火灾报警系统.第10部分:火焰探测器.火警点探测器.德文版本 EN 54-10/A1-2005

【英文标准名称】: Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors; English version of DIN EN 54-10/A1:2006-03
【原文标准名称】: 火灾探测和火灾报警系统.第10部分:火焰探测器.火警点探测器.德文版本 EN 54-10/A1-2005
【标准号】: EN

EN 60512-1-100-2006 电子设备连接件.试验和测量.第1-100部分:总则.应用出版物(IEC 60512-1-100-2006)

【英文标准名称】: Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications (IEC 60512-1-100:2006); German version EN 60512-1-100:2006
【原文标准名称】: 电子设备连接件.试验和测量.第1-100部分:总则.应用出版物(IEC 60512-

JIS Z8503-3-1999 控制中心的人类工效学设计.第3部分:控制室的布局

【英文标准名称】: Ergonomic design of control centres -- Part 3: Control room layout
【原文标准名称】: 控制中心的人类工效学设计.第3部分:控制室的布局
【标准号】: JIS Z8503-3-1999
【标准状态】: 现行
【国别】: 日本

ASTM E 1118-2005 强化热固性树脂管(RTRP)声辐射检验的标准实施规程

【英文标准名称】: Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
【原文标准名称】: 强化热固性树脂管(RTRP)声辐射检验的标准实施规程
【标准号】: ASTM E 1118-2005
【标准状态】: 现行

ASTM D6375-2005 用热重分析仪(TGA)Noack法测定润滑油蒸发损失的标准试验方法

【英文标准名称】: Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
【原文标准名称】: 用热重分析仪(TGA)Noack法测定润滑油蒸发损失的标准试验方法
【标准号】: ASTM D6375-2005
【标准状

EN 1366-7-2004 辅助设施的防火试验.第7部分:传送系统及其隔板

【英文标准名称】: Fire resistance tests for service installations - Part 7: Conveyor systems and their closures; German version EN 1366-7:2004
【原文标准名称】: 辅助设施的防火试验.第7部分:传送系统及其隔板
【标准号】: EN 1366-7-2004
【

ISO 3384-1999 热塑性橡胶或硫化橡胶 常温和高温下压缩应力松弛的测定

【英文标准名称】: Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
【原文标准名称】: 热塑性橡胶或硫化橡胶 常温和高温下压缩应力松弛的测定
【标准号】: ISO 3384-1999

NF V04-157-2004 奶和奶制品.抗菌剂残留物检测的免疫分析或细胞受体检测的规范化的描述指南

【英文标准名称】: Milk and milk products - Guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues.
【原文标准名称】: 奶和奶制品.抗菌剂残留物检测的免疫分析或细胞受体检测的规范化的描述指南
【标准号】:

ANSI/ASTM E1735-1996 曝光于4至25Mv的X射线放射的工业放射照相胶片的相对图像质量的测定方法

【英文标准名称】: Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 Mv
【原文标准名称】: 曝光于4至25Mv的X射线放射的工业放射照相胶片的相对图像质量的测定方法
【标准号】: ANSI/ASTM E1735-1996

ANSI Z535.3-1991 安全符号的准则

【英文标准名称】: Criteria for safety symbols
【原文标准名称】: 安全符号的准则
【标准号】: ANSI Z535.3-1991
【标准状态】: 作废
【国别】: 美国
【发布日期】: 1991
【实施或试行日期】:
【发布单位】:

BS EN 60068-2-11-1999 环境试验.试验方法.试验.试验 KA:盐雾

【英文标准名称】: Environmental testing - Test methods - Tests - Test KA - Salt mist
【原文标准名称】: 环境试验.试验方法.试验.试验 KA:盐雾
【标准号】: BS EN 60068-2-11-1999
【标准状态】: 现行
【国别】: 英国

SAE AMS4156 Aluminum Alloy, Extrusions 0.68Mg - 0.40Si (6063-T6) Solution and Precipitation Heat Treated

Product Code:SAE AMS4156
Title:Aluminum Alloy, Extrusions 0.68Mg - 0.40Si (6063-T6) Solution and Precipitation Heat Treated
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers an aluminum alloy in the form of

DIN ETS 300092-1-1995 综合业务数字网络(ISDN).呼叫用户的呼叫号码传送到被呼叫用户的服务特性.连接线路用1号数字信号发送法(DSS1).第1部分:协议规范

【英文标准名称】: Integrated Services Digital Network (ISDN) - Calling Line Identification Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol - Part 1: Protocol specification; English version ETS 300092-1:1

BS 5540-7-1991 液压油颗粒污染评定.第7部分:污染等级测定方法(称重法)

【英文标准名称】: Evaluating particulate contamination of hydraulic fluids - Method of determining the level of contamination (by the gravimetric method)
【原文标准名称】: 液压油颗粒污染评定.第7部分:污染等级测定方法(称重法)
【标准号】: BS 5540-7-1991

BS EN 112000-1980 电子元器件质量评定协调体系.通用规范:变象管和图象增强管

【英文标准名称】: Harmonized system of quality assessment for electronic components - Generic specification: image converter and image intensifier tubes
【原文标准名称】: 电子元器件质量评定协调体系.通用规范:变象管和图象增强管
【标准号】: BS EN 112000-1980<