资料描述
MIL-PRF-38535F, PERFORMANCE SPECIFICATION: INTEGRATED CIRCUITS (MICROCIRCUITS) MANUFACTURING, GENERAL SPECIFICATION FOR (1 DEC 2002)., This specification establishes the general performance requirements for integrated circuits or microcircuits and the quality and reliability assurance requirements, which must be met for their acquisition. The intent of this specification is to allow the device manufacturer the flexibility to implement best commercial practices to the maximum extent possible while still providing product that meets military performance needs. Detail requirements, specific characteristics of microcircuits, and other provisions which are sensitive to the particular use intended will be specified in the device specification. Quality assurance requirements outlined herein are for all microcircuits built on a manufacturing line which is controlled through a manufacturer's Quality Management (QM) program and has been certified and qualified in accordance with requirements herein. Several levels of product assurance including Radiation Hardness Assurance (RHA) are provided for in this specification. The certification and qualification sections found herein outline the requirements to be met by a manufacturer to be listed on a Qualified Manufacturer Listing (QML). After listing of a technology flow on a QML, the manufacturer must continually meet or improve the established baseline of certified and qualified procedures, the QM program, the manufacturer's review system, the status reporting and quality and reliability assurance requirements for all QML products. The manufacturer may present alternate methods of addressing the requirements contained in this document. This specification requires a manufacturer to establish a process flow baseline. If sufficient quality and reliability data is available, the manufacturer, through the QM program and the manufacturer's review system, may modify, substitute or delete tests. Class T is not for use in National Aeronautics and Space Administration (NASA) manned, satellite, or launch vehicle programs without written permission from the applicable NASA Project Office (i.e., cognizant electrical, electronic, and electromechanical (EEE) parts authority).
MIL-PRF-38534E
MIL-PRF-38534E, PERFORMANCE SPECIFICATION: HYBRID MICROCIRCUITS, GENERAL SPECIFICATION FOR (6 JAN 2003)., This specification establishes the general performance requirements for hybrid microcircuits, Multi- Chip Modules (MCM) and similar devices and the v
MIL-PRF-38534D
MIL-PRF-38534D, PERFORMANCE SPECIFICATION: HYBRID MICROCIRCUITS, GENERAL SPECIFICATION FOR (6 JAN 1999). This specification establishes the general performance requirements for hybrid microcircuits, Multi-Chip Modules (MCM) and similar devices and the ver
MIL-PRF-38413D (NOTICE 1)
MIL-PRF-38413D (NOTICE 1), PERFORMANCE SPECIFICATION TECHNICAL MANUAL AND FLIGHT CREW CHECKLISTS FOR AIR REFUELING PROCEDURES (1 MAR 1996) [SUPERSEDING MIL-M-38413C] [S/S BY MIL-DTL-7700G]., MIL-PRF-38413D(USAF), dated 1 Mar 1996, which has been wholly in
MIL-PRF-38413D
MIL-PRF-38413D, PERFORMANCE SPECIFICATION TECHNICAL MANUAL AND FLIGHT CREW CHECKLISTS FOR AIR REFUELING PROCEDURES (1 MAR 1996) [SUPERSEDING MIL-M-38413C]., This specification covers the preparation of air refueling procedures flight manuals and checklist
MIL-PRF-38314 (USAF)
MIL-PRF-38314 (USAF), PERFORMANCE SPECIFICATION MANUALS, TECHNICAL: OPERATION AND ASSOCIATED CHECKLIST (SPACE SYSTEMS), PREPARATION OF (18 AUG 1997)., This specification covers requirements for the preparation of operation manuals and associated checklist
MIL-PRF-38311C
MIL-PRF-38311C, PERFORMANCE SPECIFICATION MANUALS, TECHNICAL: OPERATION AND ASSOCIATED CHECKLIST (INTERCONTINENTAL BALLISTIC MISSILE) PREPARATION OF (9 DEC 1997) [SUPERSEDING MIL-M-38311B].,
MIL-PRF-38219C (AMENDMENT 1)
MIL-PRF-38219C (AMENDMENT 1), PERFORMANCE SPECIFICATION: TURBINE FUEL, LOW VOLATILITY, JP-7 (03 OCT 1997) [SUPERSEDING MIL-T-38218B]., This amendment forms a part of MIL-PRF-38219C, dated 18 September 1995, and is approved for use by the Department of the
MIL-PRF-38219C
MIL-PRF-38219C, PERFORMANCE SPECIFICATION: TURBINE FUEL, LOW VOLATILITY, JP-7 (18 SEP 1995) [SUPERSEDING MIL-T-38218B]., This specification covers one grade of aviation turbine fuel designated as JP-7.
MIL-PRF-38169A
MIL-PRF-38169A, PERFORMANCE SPECIFICATION: LENS, GOGGLE AND VISOR, HELMET, OPTICAL CHARACTERISTICS, GENERAL SPECIFICATION FOR (10 JUN 1998) [SUPERSEDING MIL-L-38169]., This is a general specification for optical characteristics of helmet visor and goggle
MIL-PRF-38039
MIL-PRF-38039, PERFORMANCE SPECIFICATION: SYSTEMS, ILLUMINATED, WARNING, CAUTION, AND ADVISORY, GENERAL SPECIFICATION FOR (11 MAY 1998) [SUPERSEDING MIL-S-38039B]., This specification covers the general requirements for illuminated warning, caution, and a
MIL-PRF-38534G
MIL-PRF-38534G, PERFORMANCE SPECIFICATION: HYBRID MICROCIRCUITS, GENERAL SPECIFICATION FOR (9 MAR 2009)., This specification establishes the general performance requirements for hybrid microcircuits, multi- chip modules (MCM) and similar devices, and the
MIL-PRF-38534F
MIL-PRF-38534F, PERFORMANCE SPECIFICATION: HYBRID MICROCIRCUITS, GENERAL SPECIFICATION FOR (12 APR 2006)., This specification establishes the general performance requirements for hybrid microcircuits, Multi- Chip Modules (MCM) and, similar devices and the
MIL-PRF-38534E
MIL-PRF-38534E, PERFORMANCE SPECIFICATION: HYBRID MICROCIRCUITS, GENERAL SPECIFICATION FOR (6 JAN 2003)., This specification establishes the general performance requirements for hybrid microcircuits, Multi- Chip Modules (MCM) and similar devices and the v
MIL-PRF-38534D
MIL-PRF-38534D, PERFORMANCE SPECIFICATION: HYBRID MICROCIRCUITS, GENERAL SPECIFICATION FOR (6 JAN 1999). This specification establishes the general performance requirements for hybrid microcircuits, Multi-Chip Modules (MCM) and similar devices and the ver
MIL-PRF-38413D (NOTICE 1)
MIL-PRF-38413D (NOTICE 1), PERFORMANCE SPECIFICATION TECHNICAL MANUAL AND FLIGHT CREW CHECKLISTS FOR AIR REFUELING PROCEDURES (1 MAR 1996) [SUPERSEDING MIL-M-38413C] [S/S BY MIL-DTL-7700G]., MIL-PRF-38413D(USAF), dated 1 Mar 1996, which has been wholly in
MIL-PRF-38413D
MIL-PRF-38413D, PERFORMANCE SPECIFICATION TECHNICAL MANUAL AND FLIGHT CREW CHECKLISTS FOR AIR REFUELING PROCEDURES (1 MAR 1996) [SUPERSEDING MIL-M-38413C]., This specification covers the preparation of air refueling procedures flight manuals and checklist
MIL-PRF-38314 (USAF)
MIL-PRF-38314 (USAF), PERFORMANCE SPECIFICATION MANUALS, TECHNICAL: OPERATION AND ASSOCIATED CHECKLIST (SPACE SYSTEMS), PREPARATION OF (18 AUG 1997)., This specification covers requirements for the preparation of operation manuals and associated checklist
MIL-PRF-38311C
MIL-PRF-38311C, PERFORMANCE SPECIFICATION MANUALS, TECHNICAL: OPERATION AND ASSOCIATED CHECKLIST (INTERCONTINENTAL BALLISTIC MISSILE) PREPARATION OF (9 DEC 1997) [SUPERSEDING MIL-M-38311B].,
MIL-PRF-38219C (AMENDMENT 1)
MIL-PRF-38219C (AMENDMENT 1), PERFORMANCE SPECIFICATION: TURBINE FUEL, LOW VOLATILITY, JP-7 (03 OCT 1997) [SUPERSEDING MIL-T-38218B]., This amendment forms a part of MIL-PRF-38219C, dated 18 September 1995, and is approved for use by the Department of the
MIL-PRF-38219C
MIL-PRF-38219C, PERFORMANCE SPECIFICATION: TURBINE FUEL, LOW VOLATILITY, JP-7 (18 SEP 1995) [SUPERSEDING MIL-T-38218B]., This specification covers one grade of aviation turbine fuel designated as JP-7.
MIL-PRF-38169A
MIL-PRF-38169A, PERFORMANCE SPECIFICATION: LENS, GOGGLE AND VISOR, HELMET, OPTICAL CHARACTERISTICS, GENERAL SPECIFICATION FOR (10 JUN 1998) [SUPERSEDING MIL-L-38169]., This is a general specification for optical characteristics of helmet visor and goggle
MIL-PRF-38039
MIL-PRF-38039, PERFORMANCE SPECIFICATION: SYSTEMS, ILLUMINATED, WARNING, CAUTION, AND ADVISORY, GENERAL SPECIFICATION FOR (11 MAY 1998) [SUPERSEDING MIL-S-38039B]., This specification covers the general requirements for illuminated warning, caution, and a
MIL-PRF-32327
MIL-PRF-32327, PERFORMANCE SPECIFICATION: RIFLE, CALIBER .50; SNIPER W/DAY OPTIC SIGHT AND CARRYING CASES - M107 (20 MAR 2009)., This specification prescribes the performance requirements and identifies the verification procedures for the RIFLE: caliber .
MIL-PRF-32317
MIL-PRF-32317, PERFORMANCE SPECIFICATION: CARTRIDGE, 7.62MM: ARMOR PIERCING - M993 (10 MAR 2009)., This specification describes the performance requirements and verification methods for the Cartridge, 7.62MM: armor piercing, M993 for use in 7.62MM weapons
MIL-PRF-32316 (W/AMENDMENT 1)
MIL-PRF-32316 (W/AMENDMENT 1), PERFORMANCE SPECIFICATION: RIFLE, 7.62MM; SEMI-AUTOMATIC SNIPER SYSTEM (SASS) - M110 (05 OCT 2009)., This specification defines the technical and performance requirements, and the associated quality assurance provisions and
MIL-PRF-32316
MIL-PRF-32316, PERFORMANCE SPECIFICATION: RIFLE, 7.62MM; SEMI-AUTOMATIC SNIPER SYSTEM (SASS) - M110 (07 OCT 2008)., This specification defines the technical and performance requirements, and the associated quality assurance provisions and verification pro
MIL-PRF-32300
MIL-PRF-32300, PERFORMANCE SPECIFICATION: CARTRIDGE, 12 GAGE SHOTGUN: BREACHING - M1030 (28 JUL 2008)., This specification identifies the performance requirements and verification provisions for the CARTRIDGE, 12 GAGE SHOTGUN: breaching, M1030 for one-sho
MIL-PRF-32273
MIL-PRF-32273, PERFORMANCE SPECIFICATION: BATTERY CELLS AND MODULES, VALVE REGULATED LEAD-ACID, MAIN STORAGE, SUBMARINE; GENERAL SPECIFICATION FOR (31 OCT 2007)., This specification covers valve regulated lead-acid (VRLA) main storage battery cells (see 6
MIL-PRF-32272
MIL-PRF-32272, PERFORMANCE SPECIFICATION: INTEGRATED POWER NODE CENTER (IPNC) (29 OCT 2007)., This specification covers the Integrated Power Node Center (IPNC), herein referred to as the IPNC. The IPNC can provide distribution, switching, control, and con
MIL-PRF-32269
MIL-PRF-32269, PERFORMANCE SPECIFICATION, PERFORATED HOMOGENEOUS STEEL ARMOR (18 OCT 2007)., This specification covers perforated homogeneous steel appliqué armor in nominal thicknesses from 0. 250 - 2.000 inch, inclusive.