北京市东城区幸福北里甲17号1-229 Tel: 010-67123753 E-mail: kefu@infoeach.com
ICP备案证书号:京ICP备14017250号-1
MIL-HDBK-828A, DEPARTMENT OF DEFENSE HANDBOOK: LASER SAFETY ON RANGES AND IN OTHER OUTDOOR AREAS (31 DEC 1996]., This handbook provides uniform evaluation guidance for the safe use of military lasers and laser systems on DoD military reservations or military controlled areas worldwide. Each military service establishes normal procedures for approving laser ranges. This guidance supplements those procedures. It does not replace those procedures or release individuals from compliance with the requirements of their particular service. The authority for guidance herein is the laser system safetyworking group (LSSWG) established by DODI 5000.1. Guidance for lasers not addressed herein should be obtained from LSSWG through respective service health and safety organizations listed in 1.2.
MIL-HDBK-816
MIL-HDBK-816, MILITARY HANDBOOK: GUIDELINES FOR DEVELOPING RADIATION HARDNESS ASSURANCE DEVICE SPECIFICATIONS (09 DEC 1994)., The primary objective of this document is to provide guidelines and easy to follow procedures for the preparation of detailed
MIL-HDBK-815
MIL-HDBK-815, MILITARY HANDBOOK: DOSE-RATE ASSURANCE GUIDELINES (07 NOV 1994)., The scope of this document is limited to dose-rate radiation effects on semiconductor electronics and is specifically intended to address hardness assurance at the piece-pa
MIL-HDBK-814
MIL-HDBK-814, MILITARY HANDBOOK: IONIZING DOSE AND NEUTRON HARDNESS ASSURANCE GUIDELINES FOR MICROCIRCUITS AND SEMICONDUCTOR DEVICES (08 FEB 1994)., The purpose of this handbook is to establish a guide to the application of piece part hardness assuranc
MIL-HDBK-808
MIL-HDBK-808, MILITARY HANDBOOK: FINISH, PROTECTIVE AND CODES FOR FINISHING SCHEMES FOR GROUND AND GROUND SUPPORT EQUIPMENT (18 JUL 1996) [SUPERSEDING MIL-STD-808A]., This standard establishes minimum requirements for finish systems for Air Force suppo
MIL-HDBK-806
MIL-HDBK-806, DEPARTMENT OF DEFENSE HANDBOOK: INSPECTION AND ACCEPTANCE STANDARDS FOR PROPULSION FLUID CELLS AND FITTINGS (09 OCT 1996) [SUPERSEDING MIL-STD-801A]., This handbook applies to all fluid cells manmanufactured in accordance with MIL-T-5578,
MIL-HDBK-804
MIL-HDBK-804, MILITARY HANDBOOK: NETWORK USER ID AND PASSWORD PROCEDURES (15 FEB 1990)., This handbook describes the administrative procedures, common user ID format, and controls for user IDs and passwords within the Navy IS community for networked sy
MIL-HDBK-803
MIL-HDBK-803, MILITARY HANDBOOK: GLASS REINFORCED PLASTICS PREVENTATIVE MAINTENANCE AND REPAIR (20 MAR 1990)., This handbook provides guidance for preventative maintenance of glass reinforced plastic (GRP) items, as well as instructions and illustratio
MIL-HDBK-802
MIL-HDBK-802, MILITARY HANDBOOK: DESIGN OF ELECTRICAL EQUIPMENT WITH SMALL STRAY MAGNETIC FIELDS (2 JUL 1990) [SUPERSEDING NAVSEA 0981-LP-052-8140]., This handbook discusses the theory and establishes standard design requirements for the minimization o
MIL-HDBK-801
MIL-HDBK-801, MILITARY HANDBOOK LIST OF PRESSURE GAUGES (31 OCT 1990). This handbook covers environmentally hardened pressure gauges. Identity is established by the National Stock Number cross-referenced to the mil-spec classification.
MIL-HDBK-800
MIL-HDBK-800, MILITARY HANDBOOK: DOCUMENTATION STREAMLINING (30 MAY 1989)., This handbook provides guidance for the implementation of documentation streamlining. 1.2 Purpose. The purpose of documentation streamlining Is to reduce acquisition costs thro
MIL-HDBK-828
MIL-HDBK-828, MILITARY HANDBOOK: LASER RANGE SAFETY (15 APR 1993)., The purpose of this handbook is to provide uniform guidance in evaluations for the safe use of military lasers and laser systems on DoD military reservations or military-controlled are
MIL-HDBK-826
MIL-HDBK-826, MILITARY HANDBOOK DRYDOCKING TIMBERS AND BLOCKS, STRENGTH PROPERTIES OF. This handbook presents compressive strength properties for drydocking timbers and built-up blocks, stability characteristics of high blocks, and friction coefficient
MIL-HDBK-818
MIL-HDBK-818, MILITARY HANDBOOK: SURVIVABLE ADAPTABLE FIBER OPTIC EMBEDDED NETWORK (SAFENET) NETWORK DEVELOPMENT GUIDANCE (31 OCT 1992)., SAFENET provides standards for an integrated set of components for use in communication subsystems which use a loc
MIL-HDBK-817
MIL-HDBK-817, MILITARY HANDBOOK: SYSTEM DEVELOPMENT RADIATION HARDNESS ASSURANCE (08 FEB 1994)., The document is intended to address the planning, hardening, and management approaches required at the system level to ensure that the system level to ensu
MIL-HDBK-816
MIL-HDBK-816, MILITARY HANDBOOK: GUIDELINES FOR DEVELOPING RADIATION HARDNESS ASSURANCE DEVICE SPECIFICATIONS (09 DEC 1994)., The primary objective of this document is to provide guidelines and easy to follow procedures for the preparation of detailed
MIL-HDBK-815
MIL-HDBK-815, MILITARY HANDBOOK: DOSE-RATE ASSURANCE GUIDELINES (07 NOV 1994)., The scope of this document is limited to dose-rate radiation effects on semiconductor electronics and is specifically intended to address hardness assurance at the piece-pa
MIL-HDBK-814
MIL-HDBK-814, MILITARY HANDBOOK: IONIZING DOSE AND NEUTRON HARDNESS ASSURANCE GUIDELINES FOR MICROCIRCUITS AND SEMICONDUCTOR DEVICES (08 FEB 1994)., The purpose of this handbook is to establish a guide to the application of piece part hardness assuranc
MIL-HDBK-808
MIL-HDBK-808, MILITARY HANDBOOK: FINISH, PROTECTIVE AND CODES FOR FINISHING SCHEMES FOR GROUND AND GROUND SUPPORT EQUIPMENT (18 JUL 1996) [SUPERSEDING MIL-STD-808A]., This standard establishes minimum requirements for finish systems for Air Force suppo
MIL-HDBK-806
MIL-HDBK-806, DEPARTMENT OF DEFENSE HANDBOOK: INSPECTION AND ACCEPTANCE STANDARDS FOR PROPULSION FLUID CELLS AND FITTINGS (09 OCT 1996) [SUPERSEDING MIL-STD-801A]., This handbook applies to all fluid cells manmanufactured in accordance with MIL-T-5578,
MIL-HDBK-804
MIL-HDBK-804, MILITARY HANDBOOK: NETWORK USER ID AND PASSWORD PROCEDURES (15 FEB 1990)., This handbook describes the administrative procedures, common user ID format, and controls for user IDs and passwords within the Navy IS community for networked sy
MIL-HDBK-803
MIL-HDBK-803, MILITARY HANDBOOK: GLASS REINFORCED PLASTICS PREVENTATIVE MAINTENANCE AND REPAIR (20 MAR 1990)., This handbook provides guidance for preventative maintenance of glass reinforced plastic (GRP) items, as well as instructions and illustratio
MIL-HDBK-802
MIL-HDBK-802, MILITARY HANDBOOK: DESIGN OF ELECTRICAL EQUIPMENT WITH SMALL STRAY MAGNETIC FIELDS (2 JUL 1990) [SUPERSEDING NAVSEA 0981-LP-052-8140]., This handbook discusses the theory and establishes standard design requirements for the minimization o
MIL-HDBK-801
MIL-HDBK-801, MILITARY HANDBOOK LIST OF PRESSURE GAUGES (31 OCT 1990). This handbook covers environmentally hardened pressure gauges. Identity is established by the National Stock Number cross-referenced to the mil-spec classification.
MIL-HDBK-800
MIL-HDBK-800, MILITARY HANDBOOK: DOCUMENTATION STREAMLINING (30 MAY 1989)., This handbook provides guidance for the implementation of documentation streamlining. 1.2 Purpose. The purpose of documentation streamlining Is to reduce acquisition costs thro
MIL-STD-21A
MIL-STD-21A, MILITARY STANDARD: WELDED-JOINT DESIGNS, ARMORED-TANK TYPE (26 NOV 1968) [S/S BY MIL-HDBK-21]., This standard covers the design of joints for structures when one or more of the materials being joined is armor.
MIL-STD-21A (NOTICE 1
MIL-STD-17B/2
MIL-STD-17B/2, MILITARY STANDARD, MECHANICAL SYMBOLS FOR AERONAUTICAL AEROSPACECRAFT AND AEROSPACECRAFT USE (PART 2) (23 JAN 1963) [S/S BY ASTM-F1000, ASTM-F856, OR ASME-Y32.2.6]. MIL-STD-17B-2 contains a listing of graphical mechanical drawing symbols
MIL-STD-17/1B
MIL-STD-17/1B, MILITARY STANDARD: MECHANICAL SYMBOLS (OTHER THAN AERONAUTICAL, AEROSPACECRAFT AND SPACECRAFT USE) PART 1 (23 JAN 1963) [S/S BY ASTM-F1000, ASTM-F856, OR ASME-Y32.2.6]., This standard establishes an approved listing of mechanical symbols
MIL-STD-15/2
MIL-STD-15/2, MILITARY STANDARD: ELECTRICAL WIRING EQUIPMENT SYMBOLS FOR SHIPS' PLANS - PART 2 (30 OCT 1961) [NO S/S DOCUMENT]., The purpose of this standard is to establish a uniform system of graphic symbols for use on drawings and plans of shipboard
MIL-STD-14A
MIL-STD-14A, MILITARY STANDARD: ARCHITECTURAL SYMBOLS (23 MAY 1949) [SUPERSEDES JAN-STD-14] [NO S/S DOCUMENT]., This standard establishes a listing of architectural symbols that shall be use din the preparation of architectural working drawings. The sy
MIL-STD-12D
MIL-STD-12D, MILITARY STANDARD: ABBREVIATIONS FOR USE ON DRAWINGS, AND IN SPECIFICATIONS, STANDARDS AND TECHNICAL DOCUMENTS (29 MAY 1981) [S/S BY ASME Y14.38M]., The terms and abbreviations in this standard are limited to those commonly used on drawing